Description

Overview
31 x 19g Budget Hex Net is our most popular rabbit netting, offering a cost effective solution to rabbit control. Integrated salvage wires provide additional strength, and the net can be turned out if required to prevent burrowing underneath. Although still heavily galvanised, this netting is not recommended for grant work.

Installation Guidelines
Rabbit netting should be supported by three line wires positioned at the top, middle and bottom of the net. The wires should be either 2.5mm or 3.15mm High Tensile. They should be tied off and joined using suitable joiners before being tensioned between the straining posts. A straining post is required at every major change in direction or any termination and should be supported by a strut or box assembly. The bottom 150mm of the netting can be turned out to help prevent the rabbit going under the fence. When all three strands of wire have been installed the rabbit netting can be rolled out, stretched slightly by hand and clipped to the line wires approximately every metre using suitable clips.

Specification:
Wire Gauge (g) 19
Mesh Size (mm) 31
Average Weight per 50 Metre Roll (kg) 22.00
Material Composition Heavily galvanised steel wire

Heights available: 600mm; 1050mm; 1200mm & 1800mm